TDVO MANUAL HORIZONTAL VERTICAL DIVIDING TABLE

Material
G26 CAST IRON UNI 5007
G26 CAST IRON UNI 5007
G26 CAST IRON UNI 5007

BREAKING LOAD: Rmin = 26
ELONGATION %: A% = 1

ELONGATION %: A% = 1
BREAKING LOAD: Rmin = 26

ELONGATION %: A% = 1
BREAKING LOAD: Rmin = 26

This dividing table has been specially designed to be positioned vertically but can also be positioned horizontally. Its compact and sturdy structure guarantees its stiffness and lack of vibrations during machining, which is indispensable to achieve high precision. The coupling of the surfaces and the inside diameter between the base and the revolving table, is obtained by lapping, while all faces are properly ground. The ring-gear and the worm are made of UNI18 NiCrMo5 casehardened, tempered, ground steel and move in an oil bath. The worm is mounted on double-acting, adjustable, radial, thrust bearings. The coupling clearance with the ring-gear can be adjusted radially. The table is fitted with a handwheel with zero-setting graduated ring divided into minutes of degrees (1 notch on the ring = 1 '). Upon request, indexing plates can be supplied which can replace the handwheel in order to carry out repetitive indexing operations according to the relevant schedules. The rotating table can be locked with two lateral screws. The table comes with an instruction and service manual.

N.B.: specifications and dimensions are not binding
H2* only on request
TYPE A B C D E F G H1 H2* L M N O P WEIGHT Kg
220 310 340 200 20 280 16H7 160 160 139 140 10H7 60 80H7 220 68
280 400 400 233 20 340 16H7 160 160 139 140 10H7 60 80H7 280 90
340 480 490 293 25 400 16H7 160 180 157 158 14H7 60 80H7 340 164
400 540 560 333 25 460 16H7 160 180 157 158 14H7 60 80H7 400 210
TYPE KG.(1) WITH TAILSTOCK REPEATABILITY PRECISION DIVISION PRECISION DIVISION RATIO F (Nm) P (N) KG KG.(1) WITHOUT TAILSTOCK
220 120 0÷5" ±9" 1:90 117 590 200 80
280 180 0÷5" ±9" 1:90 137 1000 250 120
340 240 0÷5" ±9" 1:120 172 1370 400 160
400 300 0÷5" ±9" 1:120 196 1765 500 200
back to products list